Midland A-22075 Series User Manual

P/N: A-22075/6, Rev. 1.1
Page 18 of 45
3.1.14 Lay the valve on a bench and place a properly sized wooden block beneath the short end of the
valve stem to prevent it dropping and damaging the valve seat.
3.1.15 Remove the spring follower (item 6) and the valve spring (item 5) from the valve-guide tube, if
present.
Figure 3-12 Remove Spring Follower, Spring and Valve-Guide Tube
Spring
Follower
Guide Tube

Midland A-22075 Series Specifications

General

Brand	Midland
Model	A-22075 Series
Category	Control Unit
Language	English