Midland A-22075 Series - Page 40

P/N: A-22075/6, Rev. 1.1
Page 40 of 45
9.2.3 Remove the top guide seal wire (item 16).
Figure 9-1 Remove Seal Wire
9.2.4 Remove the four (4) top-guide bolts (items 11 and 12) and situate them so they won’t be dropped
or lost.
Figure 9-2 Remove Bolts and Set Aside for Later
9.2.5 Mark the top guide (item 1) and body (item 4) with a vertical line to allow the top guide to be
reinstalled in the same orientation.
9.2.6 Lift up and remove the top guide (item 1).
Figure 9-3 Remove Top Guide
Remove Seal Wire