Manual ALAN 95 D80 (neue Produktion), 09.11.2004, 15:51, Kirsten Kunter
• Select the desired channel through the channel selector
• Press the "DW" button
• Select the second channel
• Press the button "DW" again
To cancel the function press again the "DW" button or the PTT button.
10. Memory Button M1
These buttons allows the storing and recalling of 1 preselected channel. How to store:
• select the desired channel and press M1 for at least 3 sec to store the chosen
channel in the M1 memory.
Note: if the channel will not change,control that the "EMG" button has not been
pressed.In this case, press the the "EMG" button to disactivate this function.
CAUTION: DON'T EXPOSE THE DISPLAY TO EXTREME TEMPERATURES
To Next Page
Loading...
