Why can't I receive messages on my Midland MXT275VP4?
If you are unable to receive messages on your Midland Two-Way Radio, ensure that both radios have the same channel selection and Privacy Code settings. Also, confirm that you are within range of the other radio. Keep in mind that communication can be affected by buildings and other structures.
What to do if my Midland MXT275VP4 has no power?
If your Midland Two-Way Radio has no power, check the vehicle power source (battery) and replace it if necessary. Also, check the input power connection and/or wires to the vehicle power source.
What to do if the keypad is not responding on my Midland Two-Way Radio?
If the keypad on your Midland Two-Way Radio is not responding, first ensure that the keypad “lock” is not enabled. If it's not locked, try resetting the radio by turning it off and then back on.
How to fix a dim display backlight on my Midland MXT275VP4 Two-Way Radio?
If the display backlight on your Midland Two-Way Radio is dim, confirm that your backlight setting is enabled.
General| Range | Up to 65 Miles |
|---|---|
| Weight | 1.5 lbs |
| Battery Life | Up to 12 hours |
| Display | LCD |
| Type | GMRS |
| Power Output | 5W |
| Channels | 15 |
| Weather Channels/Alerts | Yes |
| Battery | Rechargeable Lithium-Ion |
| Included Accessories | Microphone, Mounting Bracket |
| Antenna | Removable Antenna |
| Privacy Codes | 142 Privacy Codes (38 CTCSS/104 DCS) |
Lists the key features of the MXT275 GMRS 2-Way Radio.
Warning against unauthorized modifications to the radio unit.
Explains the need for an FCC license to operate GMRS channels.
Details compliance with national and international RF exposure standards.
Covers vehicle compatibility, safety, and necessary tools before installation.
Advises on choosing a suitable location for the radio in the vehicle.
Warns about potential damage when drilling into vehicle dash components.
Step-by-step guide for attaching the mounting bracket to the vehicle.
Instructions on how to properly install the radio into the bracket.
Explains how antenna placement affects radio performance.
Guidelines for optimal antenna mounting on the vehicle.
Advice on routing the antenna cable and protecting it.
Details cigarette lighter adapter and hard-wired power connections.
Connecting the external antenna and optional speaker.
How to connect the microphone to the radio unit.
Requirements for external speakers, including impedance and wattage.
Identifies buttons and functions on the microphone unit.
Describes the channel up/down and power buttons on the microphone.
Explains the function of the PTT button for transmitting.
Location and function of front panel connectors.
Details of back panel connections for antenna, speaker, and power.
Detailed explanation of all icons and symbols shown on the LCD screen.
Factors influencing the communication range of the radio.
Advice on optimizing range through antenna placement and power settings.
Step-by-step instructions for turning the radio on and off.
How to choose and change channels for communication.
Procedure for increasing or decreasing the radio's audio volume.
Guide on using the PTT button and understanding TX/RX indicators.
Prevents accidental changes to radio settings by locking the keypad.
Detailed steps to enable and disable the keypad lock feature.
How to listen for transmissions on the current channel.
How to use the auto-scan mode to find active channels.
Instructions for using the NOAA weather radio and scan features.
How to scan all NOAA channels for broadcasts.
Steps to select a specific NOAA weather channel.
How to activate the weather alert siren notification.
A visual guide to the radio's menu options and functions.
How to set up CTCSS or DCS tones to filter transmissions.
Explains CTCSS and DCS for shared channel usage.
Step-by-step guide to selecting privacy tone type and code number.
How to select between high and low power output for transmissions.
Guide to setting the squelch level for optimal reception.
Details on adjusting squelch sensitivity from 01 to 09.
How to enable the beep that signals the end of a transmission.
How to select one of the five available call alert tones.
How to disable all audible beeps and tones on the radio.
How to enable repeater channels to extend range and coverage.
Guide to changing the LCD display background color.
Options for selecting the handheld, base, or both speakers.
Steps to restore the radio to its original factory default settings.
Instructions on how to clean and maintain the radio.
Solutions for frequently encountered issues with the radio.
Lists GMRS, WX, and Repeater channels with their frequencies.
A chart mapping CTCSS codes to their corresponding frequencies.
A chart listing DCS codes and their numerical values.
Information on where to buy additional accessories for the radio.
Details on obtaining warranty service for products purchased in USA and Canada.
Provides the company's mailing address and phone number for inquiries.
To Next Page