Midland MXT275VP4 - Basic Radio Operations; Powering the Radio On and Off; Selecting the Active Channel; Adjusting Volume Level

Page 14
midlandusa.com
Model MXT275
Power On/O󰀨
To turn the radio on and o:
1. Withtheradioo󰀨,pressandholdthePowerButton.Youwillhearatone
when the radio is on.
▪ The LCD display will show all icons for one second and then display
the most recently selected channel.
2. With the radio on, press and hold the Power Button.
▪ TheLCDdisplaywillgoblankwhentheradioturnso󰀨.
Selecting the Active Channel
IMPORTANT! To communicate between two radios, both radios must
be set to the same channel and Privacy Code (see Selecting a Privacy
Code) selections.
To Select the Active channel:
1. Be sure the radio is turned on (See Power On/O󰀨)
2.
Press and release the Channel Up button on the microphone to
scroll forward through the available channels. Press and release the
Channel Down button on the microphone to scroll backward
through the available channels.
▪ The Channel icon on the LCD display will show the active channel.
▪ To make the repeater channels selectable, see Activate Repeater
Channels.
Adjusting the Volume
1. Press and release the Volume Up button to increase the volume
2. Press and release the Volume Down button to decrease the volume