8
||
midlandusa.com
10. Proofread and save your program.
11. Write the program to the radio.
12. Turn the radio off and disconnect the programming cable.
13. Turn the radio on, and test it with other radios to make sure it is working correctly.
14. Write the program to other MB400 radios, or save and close the program.
a. Use the “Save As” command under “File”.
b. Give your program a name and save it in a memorable location.
c. Click “Save.”
a. Click on the green “W” icon.
READ A PROGRAMMED MB400 RADIO
Read a programmed MB400 so you can:
• Use the same programming values for other MB400 radios.
• Save the programming file for later use.
• Check the settings to make sure they are correct and match other radios.
b. Click on “Start” to send the programming data to the radio.
c. The radio will return to its normal state after programming is complete. You will hear
“Midland Ready” with the channel number.
W
To Next Page
Loading...
