9
||
midlandusa.com
1. Follow steps 1 through 5 above to connect the radio to the computer and open the software.
2. Use the “Open Folder” icon to locate and open your file.
PROGRAM USING A SAVED FILE
1. Follow steps 1 through 5 above to connect the radio to the computer and open the software.
2. Click on the red “R” icon.
3. Click on “Start” to read the programming data from the radio.
4. The radio will return to its normal state when complete. You will hear “Midland Ready”
with the channel number.
5. The programming data will be displayed on their respective program window.
6. Turn off the radio and disconnect the programming cable.
7. With the programming software still open, connect another MB400 radio follow step 11 above
to write the same data to additional radios.
8. Or, save your file for later use and close the program.
3. The file will automatically populate all settings with the data saved in your file
4. Click on the green “W” icon as described in step 11 above to program the radio.
5. Disconnect the radio and test it with other radios to make sure it is operating correctly.
R
To Next Page
Loading...
