Midland GXT-400 - Page 12

®
Model GXT-400
Page 12 www.midlandradio.com
CALL TONE SELECTION :
Your GXT-400 has 5 user-selectable CALL TONE. To select, press the
MENU [14] button seven times, a “CA” icon will appear on the display
while on the right of the “CA” icon the current CALL TONE setting is
displayed. Then press the [13] buttons to select among the 5
CALL TONE selections, the radio will emit the corresponding tone for
each selection. To confirm, press the PTT [12] button or wait for 5 sec-
onds roughly.
WEATHER (WX) BAND RECEIVER FUNCTION :
Your GXT-400 has a WEATHER (WX) BAND RECEIVER function, to
enable user to receive Weather alert/report from designated NOAA
stations.
To activate the WEATHER (WX) RECEIVER function, press and hold
the MENU [14] button around 3 seconds. The current WX CHANNEL
[4] and the WX BAND [7] icon will appear on the display.
Then press the [13] buttons to select one of the ten WX BAND
channel. To confirm, press the PTT [12] button or wait for 5 seconds
roughly.
To de-activate the WEATHER (WX) RECEIVER function, press and
hold the MENU [14] button around 3 seconds. The current
GMRS/FRS radio setting will be displayed and the WX BAND icon will
disappear.
/
/