M-Mini Instruction Guide | 7
OPERATION
Power On/O the radio
Turn VOL switch clockwise to power on the radio, the LCD displays the CB stan-
dard followed by the channel number.
Turn the VOL knob counterclockwise, until it clicks. The radio is powered o.
Volume control
Turn clockwise to increase volume and turn counterclockwise to decrease volume.
Channel Selection
Shortly press microphone UP or DOWN to change working channel.
Hold microphone UP or DOWN to change the working channel fast.
Squelch level control (28 level and o)
Shortly press SQ, until LCD shortly displays “SQ” and then displays current level
squelch;
0.F Squelch o
0.1 Lowest Squelch level
2.8 highest Squelch level
While display shows current level, press microphone UP or DOWN shortly to
change SQ level; hold microphone UP or DOWN to change the SQ level fast.
Hold SQ or wait for 3 seconds to store and exit.
Note: Higher SQ level require a stronger signal to open the speaker and hear the spo-
kesman.
ASQ control (9 levels)
Hold SQ key, until LCD displays AQ, the ASQ function is turned on. The LCD will
display the ASQ level.
A.1 lowest ASQ level
A.9 highest ASQ level
Shortly press microphone UP or DOWN to change ASQ level, hold microphone
UP or DOWN to change the ASQ level fast fast. Hold SQ or wait for 3 seconds
to store and exit.
Note: Higher ASQ level require a stronger signal to open the speaker and hear the spo-
kesman.
To Next Page
Loading...
Need help?
General
