Need help?Do you have a question about the Midland M Zero and is the answer not in the manual?
General| Frequency Range | 446.00625 - 446.09375 MHz |
|---|---|
| Waterproof | No |
| Channels | 8 |
| Output Power | 0.5 W |
| Battery Type | AAA |
Shows the channel currently in use.
Adjusts the receiver sensitivity for signal strength.
Eliminates background noise when no signal is received.
Switches between normal and emergency channels.
Connects the microphone to the transceiver unit.
Adjusts the receiver gain level.
Adjusts the squelch threshold.
Controls power and audio volume.
Buttons to select the desired radio channel.
Shows the currently selected channel.
Illuminates when transmitting.
Switches between emergency and normal channels.
Selects between CB radio and PA amplifier modes.
Connects the 27MHz antenna to the transceiver.
Connects the unit to a 12V power source.
Connects an external speaker, muting the internal one.
Connects an external speaker for PA function.
Discusses transmission cable, vehicle, and coaxial cable importance.
General rules for proper mobile antenna installation.
Discusses antenna placement on the vehicle roof.
Explains antenna placement on the front cowl.
Describes antenna placement on the rear deck.
Details antenna mounting on bumpers or brackets.
Steps and conditions for receiving transmissions.
Steps for transmitting audio and microphone use.
How to select between Australia, New Zealand, and Marine bands.
How to quickly scroll through channels.
Details frequency coverage, sensitivity, and rejection ratios.
Details output power, modulation, and impedance.
Details warranty coverage and duration for consumers.
Details warranty coverage for commercial applications.
Instructions for obtaining warranty repair or replacement.
To Next Page
