M Zero Instruction Guide | 5
INSTALLATION
Safety and convenience are the primary considerationT for mounting
any piece of mobile equipment. All controls must be readily available to
the operator without interfering with the safe operation of the vehicle.
Be sure all cables are clear of the brake, clutch and accelerator. Also,
thought must be given to the convenience and comfort of passengers.
Another extremely important requirement is the ease of installation and
removal for those occasions when you might want to remove the unit
for service and maintenance.
The most common mounting position for a transceiver is under the
dashboard directly over the drive shaft hump. Do not mount the
transceiver in the path of the heater or air conditioning stream. Take
your time and plan your installation carefully. When the best location
for mountingJTEFUFSNJOFE, use the mounting bracket as a template
to mark mounting holes. Take care that you do not drill into wiring,
trim or other accessories.
Washers
Washers
Washers
Washers
Screws
Screws
Screws
Bracket
Nuts
Nuts
Screws and
washers
To Next Page
Loading...
Need help?
General
