midlandusa.com Page 9
MB400 PROGRAMMING INSTRUCTIONS
10. Proof read and save your program.
a. Use the “Save As” command under “File”.
b. Give your program a name and save it in a memorable location.
c. Click “Save.”
11. Write the program to the radio.
a. Click on the green “W” icon.
b. Click on “Start” to send the programming data to the radio.
c. The radio will return to its normal state after programming is complete. You will hear
“Midland Ready” with the channel number.
12. Turn the radio off and disconnect the programming cable.
13. Turn the radio on, and test it with other radios to make sure it is working correctly.
14. Write the program to other MB400 radios, or save and close the program.
To Next Page
Loading...
