11
Duplex Operation
Press and hold the MENU key on channels 1-8 and channels 41-48 to enable the Duplex operation.
Duplex operation allows the radio to transmit on a dierent frequency to that which it receives
allowing operation through repeater stations. Repeaters automatically retransmit your signal over a
wider area providing greatly increased range. Duplex operates only on channels 1-8 & 41-48. When
duplex is selected on these channels, the radio receives on that channel but actually transmits 30
channels higher. In repeater mode, the radio only operates on repeater channels.
Channel Selecting 1 2 3 4 5* 6 7 8
Receiving Channel 1 2 3 4 5* 6 7 8
Transmitting Channel 31 32 33 34 35* 36 37 38
Channel Selecting 41 42 43 44 45* 46 47 48
Receiving Channel 41 42 43 44 45* 46 47 48
Transmitting Channel 71 72 73 74 75* 76 77 78
* Channel only for Emergency.
PRI Channel
e Priority Channel feature allows you to immediately recall any one of your channels with instant
access to your working channel or your local repeater with one button.
PRI Channel Setting
1: Select the channel you requested
2: Press and hold the PRI function key, then enter the priority channel setting, and then select the
priority channel through the channel selection key. When selecting the channel you requested, press
the PRI function key for a second time to complete the priority channel setting.
Call Back the PRI Channel
Press the PRI function key, the intercom will switch to the set priority channel immediately aer the
PC logo is displayed. PRI short press the function key again to exit the priority channel mode.
When you press the PTT button, the LCD will display the PC logo instead of the priority
channel number.
To Next Page
Loading...
Need help?
General