Page 8
midlandusa.com
Model MXMC01
• Your radio will rapidly scan through the 15 available channels and
will pause on any active channel.
• “Auto-scan” will resume when there has been no activity on the
current channel for four seconds.
3. To transmit during “auto scan,” press and hold the PTT button on
the microphone while the radio is paused on the desired channel.
• The radio will remain on the active channel for three seconds after
the PTT button is released.
4. To exit the “auto-scan” mode, press and release the Scan button.
• The Scanning icon will turn off when the radio is no longer in
“auto-scan” mode
NOAA Weather Radio/Scan
Your MXMC01 has a NOAA Weather Radio function, to enable the
user to receive weather reports from designated NOAA stations.
Your radio also has a NOAA Weather Scan function, to enable the
user to scan all 10 channels.
To enter and exit Weather Scan
1. Press and release the WX button to enter weather mode
2. The radio will then scan all weather channels and will lock on to
the strongest weather channel in your area (the active channel
will continuously ash).
3. Use the Channel Up or Channel Down on the microphone to
force the radio to re-scan the weather channels while the radio is
in scan mode
• Pressing the Scan button takes the radio out of scanning mode,
locking in the active channel. Press and release the Scan button
to reactivate weather scan.
4. Press the WX or PTT to exit Weather Mode.
To Manually Set the Weather Channel
1. With the Weather Scan activated, press the Scan button to exit
scanning mode.
• The Weather icon and active channel will stop ashing and will
continuously be displayed on the LCD.
2. Using the Channel Up / Channel Down buttons on the micro-
phone, manually set the active weather channel.
To Next Page
Loading...