Midland P-20 User Manual (English)

Questions and Answers:

A
andrew44Jul 28, 2025
Why is the range so short on my Midland Two-Way Radio?
- W
  weaverwilliamJul 28, 2025
  If your Midland Two-Way Radio displays a short range, this may be due to operating the radio from inside a vehicle or a metal building. If possible, operate outside of vehicles or buildings. Also, carrying the radio so that the antenna is very near the body will decrease the range, so hold the radio in the open for the best range. Finally, the battery condition can affect range, so replace or recharge the batteries.
T
tanya35Aug 1, 2025
What to do if my Midland Two-Way Radio cannot receive messages?
- M
  Michael EspinozaAug 1, 2025
  If your Midland Two-Way Radio isn't receiving messages, ensure the volume is high enough. Also, confirm that all radios are set to the same channel and CTCSS/DCS code settings. Your location may be the issue, so try moving to ensure you are in range. Check and properly install or replace the batteries. Be aware that buildings, obstructions, or being indoors or in a vehicle can interfere with communication, so try changing your location. Finally, ensure your radio isn't transmitting, which can happen if it's in VOX mode or if accessories aren't properly set.
M
Meredith WoodAug 6, 2025
How to fix a Midland P-20 Two-Way Radio with no power?
- D
  deannamiddletonAug 6, 2025
  If your Midland Two-Way Radio has no power, check the battery installation and/or replace the batteries.
P
Peter PetersenAug 10, 2025
How to reduce interference on Midland P-20?
- T
  Tonya WebbAug 10, 2025
  If you are experiencing interference or static on your Midland Two-Way Radio, using the CTCSS feature should stop you from hearing interference from other users and computers. Make sure that radios are at least 5 feet apart. Also, be aware that obstacles interfere with transmissions and the talk range is up to 4 miles in unobstructed, clear areas.
J
Jamie FisherAug 15, 2025
What to do if Midland P-20 buttons aren't responding?
- J
  Jeremy RamosAug 15, 2025
  If your Midland Two-Way Radio is not responding to button presses, first ensure that the radio is not in 'VOX' mode. Also, check that the key lock is not enabled. Make sure the radio is not transmitting. The radio might need to be reset. Ensure the accessory microphone is set properly.
J
Jonathan ConwayAug 18, 2025
How to brighten a dim display on a Midland Two-Way Radio?
- L
  Laura ContrerasAug 18, 2025
  If the display on your Midland Two-Way Radio is dim, try repositioning or replacing the batteries.
K
Kaylee CampbellAug 23, 2025
Why is my Midland P-20 Two-Way Radio charger not working?
- S
  Scott MendozaAug 23, 2025
  If the charger for your Midland Two-Way Radio is not functioning, check that the charger is fully inserted into the jack on the bottom of the radio. If using the drop-in charger, check the contacts on the bottom of the radio, they may require cleaning. If all is correct allow the batteries to charge for the specified time. Ensure the outlet the charger is plugged into is functioning properly. Check that the batteries are installed in the radio properly. You can also try removing the batteries from the radio and charging them separately.