EasyManua.ls Logo

Midland PACIFIC - Preparing the transceiver; Installing and removing the belt clip; Installing and removing batteries

Midland PACIFIC
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
ENGLISH
4. Preparing the transceiver
Makesurethefollowingitemsaresuppliedinthepackagebefore
youstartusingyourtransceiver:
Transceiver;
Desk/wallsupport
NiMHbatterypack
Beltclip;
Desktopchargeralongwithadaptor;
2-waycarlightercharger;
Usermanual;
If any of the above is missing or damaged contact your supplier
immediately.
4.1 Installing and removing the belt clip
Withthebeltclipyoucaneasilyattachthetransceivertoyourbelt.
Thecliphowever,mustberemovedinordertoinstallorchangethe
batteries.Toremovethebeltclipfollowtheinstructionsofpicture1.
Toxtheclipbacktothedeviceslotitintheguidesatthebackofthe
transceiveruntilitclicksintoplace.
4.2 Installing and removing batteries
ThetransceiverisoperatedbythesuppliedNiMHbatterypackorby
4optionalAAbattery.Thesecanbeeitheroneoftwotypes:
RechargeableNiMH(1,2 V)-availableindifferentcapacity(in
mA/h).Batterieswithhighercapacitywillsupplylongercharger
butwillrequirelongertimestorecharge.
Non-rechargeablealkaline(1,5V)
! Do not install rechargeable and alkaline batteries at the same
time in your transceiver. Always use the same batteries as a
set (type and make) so that you can be sure their level of
charge is the same.
! If you do not use the transceiver for a long time remo ve the
batteries/ battery pack.
4.2.a Installation
1) Removethebeltclipasexplainedinparagraph4.1;
2) Openthebatteriescompartmentasshowninpicture2;
3) Insertthebatterypackintothebatterycompartmentasshownin
picture2.
4)Replacethecoveronthebatteriescompartment.
5) Replacethebeltclip.
! If you use the batteries, be careful to insert them with the
correct polarity as illustrated inside the compartment.
! Be careful to snap close the battery cover.
a
b
c
d
e
f
i
g
e
h
e1
1
2
3
8
9
10
4
6
7
5
a
b
c
d
e
f
i
g
e
h
e1
1
2
3
8
9
10
4
6
7
5
Picture1
Picture2

Other manuals for Midland PACIFIC

Related product manuals