Need help?Do you have a question about the Midland Precision Series 4001 and is the answer not in the manual?
Lists the components included with your Midland CB for installation.
Provides guidance on selecting an optimal location for the CB unit in your vehicle.
Details the steps for physically mounting the CB unit using the provided bracket.
Explains the procedure for connecting the transceiver to the vehicle's negative ground electrical system.
Guides on how to slide and secure the main transceiver unit into its mounting bracket.
Provides instructions on how to mount the microphone hanger bracket.
Covers selection, positioning, installation, tuning, and factors affecting antenna performance and range.
Details the functions of ON/OFF VOLUME, SQUELCH, RF GAIN, MIC GAIN, and Push-To-Talk bar.
Explains the purpose of the S/RF POWER METER, LEDs, and various switches like BRIGHT/DIM, ANL/OFF, FIL/OUT, PA/CB.
Describes the ANTENNA CONNECTOR, EXT SP, PA JACK, and DC 13.8V POWER JACK.
Step-by-step instructions on how to turn on, adjust, and operate the CB transceiver for receiving and transmitting.
Lists detailed specifications for the transceiver, including general, receiver, and transmitter parameters.
Provides instructions for returning the unit for service, including packing and required documentation.
Outlines the terms and conditions of the limited warranty for the Midland Model 4001 CB transceiver.
To Next Page
General
