Midland XTC400 - Page 116

EC Certificate of Conformity
(to EC Directive 99/5 -2004/108- 2006/95/EC)
DO:
Rev:
7.1.4.4
5
Authorised on: 02/02/2010
By : S. Peterlini
Signature
This document is owned by Cte International srl. It is forbiddeen to reproduce or diffuse it without the authorisation of the Quality
Assurance Manager of CTE International srl.
DECLARATION OF CONFORMITY N°2013082802 Rev 1
Manufacturer: C.T.E INTERNATIONAL S.rl.
Address: VIA SEVARDI, 7 – ZONA INDUSTRIALE MANCASALE – 42124 REGGIO EMILIA
Products Name:
XTC400
Product Type: Wi-Fi Camera Video Recorder
Brand : MIDLAND
The product described above is in conformity with the following Specifications based on sample testing:
Item of
99/05/CE
Standard Title Edition
or date of issue
3.1a EN 60950-1
Information technology equipment - Safety - Part 1:
General requirements
EN 60950-1 : 2006
+A11:2009+A1:2010
+A12 :2011
3.1.a EN 62311
Assessment of electronic and electrical equipment related
to human exposure restrictions for electromagnetic fields
(0 Hz - 300 GHz)
IEC 62311:2007 (Modified)
2008
3.1b EN 301 489-01
Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical
requirements
V1.9.2
3.1b EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for
radio equipment; Part 17: Specific conditions for
Broadband Data Transmission Systems
V2.2.1
3.2 EN 300 328
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Wideband transmission systems; Data
transmission equipment operating in the 2,4 GHz ISM
band and using wide band modulation techniques;
Harmonized EN covering essential requirements under
article 3.2 of the R&TTE Directive
V1.7.1
Supplementary information to the conformity assessment result on which the declaration is based:
Conformity assessment procedures are referred to art. 10(4) linked with Annex III of Directive 1999/5/ec.
The test sample fullfils the requirements specified above, on the basis of test result and their evaluation.
The product herewith complies with the essential requirements of EC Directive 99/05/EC, 2004/108/EC and
following implements and modifications, 2006/95/EC and following implements and modifications, 93/97/EC.
Reference to any marking or other indication (e.g. on the product) is exhibited in attachment to this
declaration.
Reggio Emilia, 28/08/2013
CTE International srl
Quality Assurance Manager
Peterlini Stefano