Minimum System Requirements
Processor 3.2GHz or faster
Ram 1GB or greater
Video Card 256MB or greater
Video playback requires H.264 codec.
To obtain more information go to xtcactioncam.com
Upgrade & Firmware
Note: Be sure the camera has the latest rmware
To check the rmware version connect the camera to your
mobile device, open action connect App. go to settings -
about - version.
To upgrade your device visit actioncamxtc.com and follow
the procedure.
Indications
Battery status
Battery LED Meaning
Solid Blue Full battery level (fully
charged)
Blinking Blue Medium battery level
(battery charging)
Solid Red Low Battery level
Blinking Red* Battery level too low
No light Battery is depleted
*Note: When the red battery LED begins blinking, be pre-
pared to charge the battery because the camera will stop
recording at this point.
To Next Page
Loading...
