MidMark M11 Quick Guide
1. Check distilled water level
2. Verify that the machine is on
3. Fill Trays in machine with instruments. Be mindful of not overfilling
4. Close and Latch the door
5. Select the run cycle, instruments in a pouches or instruments out of a pouch.
-Without pouch is the Scissor symbol
-With a pouch is the Scissor symbol with a rectangle around it
6. Press the start button which is the button the a diamond and vertical line
7. The Door will release during cool down
8. If the instruments are run without a pouch, places the sterilized instruments in a pre run
pouch after the run is complete. They are located in the top drawer below the Statim.
9. Open door and carefully remove instruments
Need help?
General
