To Next PageTo Next Page
Need help?Do you have a question about the Midmark M7 and is the answer not in the manual?
General| Manufacturer | Midmark |
|---|---|
| Type | Autoclave |
| Model | M7 |
| Power Supply | 115 VAC, 50/60 Hz |
| Material | Stainless Steel |
Outlines the manual's content, intended audience, and scope.
Specifies the intended medical and dental applications for sterilizing equipment.
Emphasizes reading and understanding the manual for safe operation and personnel awareness.
Defines DANGER, WARNING, CAUTION, EQUIPMENT ALERT, and NOTE symbols and their meanings.
Provides environmental requirements for ambient temperature, humidity, and pressure.
Details placement, clearance, and surface requirements for optimal operation and safety.
Steps for safely disconnecting, draining, and moving the sterilizer.
Specifies voltage, frequency, and grounding requirements for safe and proper function.
Lists and explains the primary functions and user interface elements of the sterilizer.
Describes the physical components like tray racks and temperature gauges.
Details safety systems like overheat monitoring and pressure relief valves.
Guidelines on using physical and process monitors for sterilization validation.
Instructions for cleaning and preparing instruments before sterilization.
Best practices for arranging instruments on trays for optimal steam penetration.
Specifies temperature, pressure, and exposure time for different load types.
Adjustments for sterilization cycles at altitudes above 1000 feet.
Lists approved accessories recommended for use with the sterilizer.
Steps to prepare the unit, including checking voltage and filling the reservoir.
Daily cleaning tasks for external surfaces and the door gasket.
Weekly cleaning of the chamber, trays, and draining the reservoir.
Monthly system flushing procedure using a special cleaner.
