21
OPERATOR MAINTENANCE
It is responsibility of user to establish a periodic maintenance procedure to as-
sure correct operation of equipment and reliable sterilization of loads. Contact
your local distributor or representative to develop a program for planned mainte-
nance.
Daily
1. Clean External Surfaces - Wipe with a soft dry cloth and wash occasionally
with a damp cloth and mild soap or detergent.
2. Clean Sterilizer Door Gasket
-
Clean door gasket (1) and mating
surface (2) with a damp cloth.
Examine gasket (1) for possible
damage that could prevent a
good sealing surface.
WARNING
Make sure that unit is cool when cleaning door gasket and
any mating surfaces. Failure to do so could result in serious
burns to hands.
Operator
Maintenance
Return To Table Of Contents
To Next Page
Loading...