Additional settings
72
PIN code
The Additional settings menu incorporates relevant functions and
system settings which require an enhanced knowledge of machine
reprocessing. Access to the menu can therefore be protected by a
four digit PIN code. The standard PIN code is "8000" and can be
changed to a custom 4-digit code.
It is not possible to block individual options or the inputting of
multiple PIN codes at the same time.
If a PIN code is lost, a new code must be issued by Miele
Service.
Entering the PIN
code
If access to the Additional settings menu is blocked, you will be
prompted to enter the PIN code when it is selected.
If you do not have the PIN code, contact a user with appropriate
access rights or cancel the process using the button.
Use the arrow buttons (higher) and (lower) to enter the relevant
digits.
Confirm each digit individually with the OK button.
When the OK button is pressed, the display jumps automatically to
the next input position. You cannot go back to the previous entry. If a
mistake is made, the process must be cancelled using the button
and repeated. Entered digits are replaced by a * symbol.
If all digits are entered correctly, the menu will be released.
If an incorrect entry is made, an error message will appear.
Confirm the message with OK.
Access remains blocked and the display reverts to the menu
selection.
To Next Page
