Changing a program
If the "Start" button has not yet been
pressed, the selected program can be
changed.
^
Turn the program selector to the
desired program.
^
If required select the additional
function "Extra Drying" again. See
"Selecting an additional function".
^
Press the "Start" button.
Canceling a program
Once a program is running it should
only be canceled in extreme cases,
e.g. when items in the machine are
moving and need to be arranged
securely.
^
Turn the program selector to "Stop".
The program is canceled after
2 seconds.
^
Open the door.
,
Caution! Water and items in the
machine may be hot. Danger of
burning or scalding!
^ Rearrange the items securely.
Observe appropriate health and
safety regulations - wear protective
gloves when necessary.
^ Replenish powder detergent if
necessary.
^ Close the door.
^
Select the "Drain" program. The
waste water is drained.
^
Select and start the program again.
Use
26
To Next Page
Loading...
