Miele 06 868 521 - Page 33

^
Temperature "Final rinse":
Turn the program selector to the
"STOP" position (the programming
level is displayed in this position
only).
^
Press "Extra Drying" again. "E05"
(programming level 5) is displayed
field.
^
Turn the program selector to the
program to be changed. The actual
value is displayed after °F.
^
Press and hold "Display", until the
desired value is displayed.
^
Temperature holding time "Final
rinse":
Turn the program selector to the
"STOP" position (the programming
level is displayed in this position
only).
^
Press "Extra Drying" again. "E06"
(programming level 6) is displayed
field.
^
Turn the program selector to the
program to be changed. The actual
value is displayed after min.
^
Press "Display" until the required
value is displayed.
^ Having changed a value or all
values:
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. The
change has been saved.
Programming special functions
33