Ironing
The ironing process is controlled by the
foot pedal which has three operating
positions:
– raising the heater plate (rest)
– pressing
– ironing
To iron
^
Press the foot pedal down to the
floor.
,
Do not put fingers between the
heater plate and the roller.
Danger of burning and injuring
fingers.
To press
^
First press the foot pedal down to the
floor and then lift your foot up a little
so that the heater plate remains in
position but the roller does not rotate.
To raise the heater plate
^ Take your foot off the pedal.
Ironing
16
To Next Page
Loading...
Need help?
General
