Electrical connection 120 V
The appliance is supplied with a power
cord and NEMA 5-15 P plug ready for
connection to an a.c. single phase
120 V 60 Hz supply (see data plate).
The fuse rating is 15 amps.
Electrical connection 208 V or 240 V
The appliance is supplied with a power
cord and NEMA 6-20 P plug ready for
connection to an a.c. single phase
208/240 V 60 Hz supply.
The fuse rating is 20 amps.
Wall outlet: NEMA 6-20 R, for a 20 A,
208/240 V.
,
Do not modify the machine
power cord or plug, the machine is
approved for US and CDN.
All electrical work should be carried
out by a qualified electrician in
accordance with local and national
safety regulations.
Do not connect the rotary iron to an
extension cord. Extension cords do
not guarantee the required safety of
the appliance (e.g. danger of
overheating).
For the 208/240 V version please take
note of the following color codes of the
wires inside the power cord:
Green/yellow = ground
Blue = live 1
Brown = live 2
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
30
To Next Page
Loading...
