EasyManua.ls Logo

Miele CM 5310 - Bean Container and Ground Coffee Chute; Cleaning the Casing; Opening the Maintenance Menu; Rinsing the Appliance

Miele CM 5310
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
45
Tip: In addition to your weekly cleaning
routine we recommend carrying out the
alternative cleaning procedure once a
month. For example if you manually
clean the machine once a week, then
you should run the Clean milk pipework
maintenance programme once a month.
This combination will ensure that the
milk pipework is cleaned optimally.
Bean container and ground
coffee chute
Danger of injury from the grinder!
Switch off the coffee machine and
disconnect it from the power supply
before cleaning the bean container.
Coffee beans contain oils which can
deposit on the walls of the bean
container and hinder the flow of the
beans. Therefore, clean the bean
container regularly with a soft, dry cloth.
Open the bean container.
Remove any coffee beans.
Clean the bean container with a soft,
dry cloth.
The bean container can now be refilled.
If necessary, clean the ground coffee
chute:
Open the coffee chute and remove
any ground coffee residue.
Tip: Use a vacuum cleaner to remove
any coffee residues from the bean
container and the ground coffee chute.
Cleaning the casing
If soiling is allowed to stay on for a
long time or there is contact with
unsuitable cleaning agents, surfaces
can alter or discolour.
Remove any soiling immediately.
Ensure that any splashes of descaler
are wiped up immediately.
Switch the coffee machine off.
Clean the appliance front with a clean
sponge cloth and a solution of warm
water and washing-up liquid.
Dry all surfaces with a soft cloth.
Tip: You can also clean the appliance
casing with the Miele all purpose
microfibre cloth.
Opening the Maintenance
menu
You can find the maintenance
programmes in the Maintenance menu.
Run the relevant maintenance
programme when the prompt to do so
appears in the display.
Touch the sensor control.
Select Maintenance and confirm
withOK.
You can now select a maintenance
programme.
Rinsing the appliance
If you have made a coffee drink, the
coffee machine will rinse the coffee
pipework automatically before
switching off. You can also start the
Rinse appliance function manually.

Table of Contents

Related product manuals