User profiles
40
Selecting a User profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Use the arrow sensors to select
Select profile and touch OK.
Select the required profile with the
arrow sensors and touch OK.
The name of the current User profile is
shown in the top left of the display.
Changing a User profile name
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Select Change name with the arrow
sensors and touch OK.
Proceed the same as with "Create
profile":
– Select to delete a character.
– To enter new characters, select the
relevant character and confirm with
OK.
– Save the new name by selecting in
the display and touching OK.
Deleting a profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Select Delete profile with the arrow
sensors and touch OK.
Select the profile you wish to delete.
Touch OK.
A tick will appear after the name and
the profile will be deleted after a short
time.
Changing a User profile
You can programme the coffee machine
so that it changes back to the Miele
standard profile automatically after each
drink is dispensed, so that the Miele
profile is always active when the
machine is switched on or so that it
retains the most recently selected
profile.
Select Change profile and touch OK.
You now have the following options:
– Manually: The selected User profile
remains active until you select
another User profile.
– After each use: The machine will
change back to the Miele standard
profile automatically after a drink is
dispensed.
– When switched on: Each time the
machine is switched on it will
automatically select the Miele
standard profile regardless of which
User profile was set before the
machine was last switched off.
Select the required option and touch
OK.
To Next Page
Loading...
