Miele CM6110 - Rinsing the Milk Pipework

Cleaning and care
60
Rinsing the milk pipework
Milk residue can clog up the milk pipes.
If a drink has been made using milk, the
coffee machine will prompt you to rinse
the pipework when you switch the
machine off.
You can also rinse the milk pipework
manually.
 Touch .
 Select Maintenance and touch OK.
 Select Rinse milk pipework and touch
OK.
 When prompted, place the end of the
milk tube into the right-hand aperture
in the drip tray.
 Touch OK.
The milk pipework will now be rinsed.
Cleaning the milk pipework
using the maintenance
programme
We recommend using the Miele
cleaning agent for milk pipework for
cleaning the milk pipework. This has
been specially developed for use with
Miele coffee machines and prevents
subsequent damage.
The milk pipework cleaning agent is
available to order from Miele or via the
internet at www.miele-shop.com.
The Clean milk pipework maintenance
programme lasts for
approx.15minutes.
 Touch .
 Select Maintenance and touch OK.
The cleaning process cannot be
cancelled once it has started. The
process has to be completed
through to the end.
 Select Clean milk pipework and touch
OK.
The process will start.
 Follow the instructions in the display.
Place milk pipe in cleaning agent appears in
the display.
Making a cleaning solution:
 Dissolve the powder in a container
with 200ml of lukewarm water. Stir
the solution with a spoon until it has
fully dissolved.