Miele CM6110 - Milk Pipework; Bean Container and Ground Coffee Chute

Cleaning and care
56
Milk pipework
Ensure that all components in which
milk is transported are cleaned on a
regular basis. Milk naturally contains
bacteria that rapidly multiply if the
milk pipework is not cleaned
properly. Soiling in the appliance
may be dangerous to health.
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
 Confirm the message with OK.
When you confirm the message Clean
milk pipework with OK, the internal
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipework:
– You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with warm
water and a little washing-up liquid
(see "Central spout with integrated
cappuccinatore").
– Or you can clean the milk pipework
using the Clean milk pipework
maintenance programme together
with the Miele cleaning agent for milk
pipework (see "Maintenance
programme - Cleaning the milk
pipework").
Bean container and ground
coffee chute
Danger of injury on the grinder.
Disconnect the coffee machine from
the power supply before cleaning.
Coffee beans contain oils which can
deposit on the walls of the bean
container and hinder the flow of the
beans. Therefore, clean the bean
container regularly with a soft cloth.
Useful tip: Use a vacuum cleaner to
remove any coffee residues from the
bean container and the ground coffee
chute.
 Open the bean container.
 Remove any coffee beans.
 Clean the bean container with a dry,
soft cloth.
The bean container can now be refilled.
If necessary, clean the ground coffee
chute:
 Open the ground coffee chute and
remove any ground coffee residue.