Descaling the machine
64
Fill the water container to the
marker with lukewarm water.
Place one descaling tablet in the
water.
Follow the instructions for the mixing
ratio carefully. It is important that you
do not fill the water container with
too much or too little water.
Otherwise the descaling process will
be cancelled prematurely.
Carrying out descaling
Push the water container back into
the appliance.
Follow the further instructions given
in the display.
When Rinse the water container and fill with
fresh tap water up to the descaling symbol
appears in the display:
Carefully rinse the water container
with clean water. Ensure that no
descaling solution residue remains in
the water container. Fill the water
container to the marker with fresh
tap water.
The descaling programme is finished at
the end of the rinsing cycle and drinks
can be made again.
To protect the machine and
surrounding surfaces from damage,
make sure you wipe up any spillages
or splashes of descaling agent
immediately.
Descaling when not prompted
by a message
Touch .
Select Maintenance and touch OK.
Select Descale appliance.
The descaling programme cannot be
cancelled once you have touched OK.
The programme has to be completed
through to the end.
Touch OK.
The descaling programme will begin.
To Next Page
Loading...
