Making coffee with milk
34
Milk flask
The stainless steel flask keeps milk cool
for longer. Good milk froth can only be
made with cold milk (< 10 °C).
Connect the stainless steel suction
tube to the inside of the lid. Make
sure that the slanted end is pointing
downwards as shown.
Fill the milk flask with milk up to max.
2 cm below the rim. Close the milk
flask with the lid.
Connect the stainless steel angled
end of the milk pipework to the top of
the lid until it clicks into place.
Place the milk flask beside the coffee
machine. Connect the other end of
the milk tube to the central spout.
If the central spout is in the uppermost
position it will be difficult to connect the
milk pipework.
To bring the central spout into the
maintenance position:
Touch for three seconds.
Touch OK to leave the maintenance
position.
To Next Page
Loading...
