Cleaning and care
70
Cleaning the milk pipework
We recommend using Miele milk
pipework cleaning agent for cleaning
the milk pipework. This has been
specially developed for use with Miele
coffee machines and prevents
subsequent damage.
The milk pipework cleaning agent is
available to order from Miele or via the
internet at www.miele-shop.com.
The Clean the milk pipework maintenance
programme lasts for
approx. 10 minutes.
Start in the Drinks menu.
Touch .
The cleaning process cannot be
cancelled once it has started. The
process has to be completed
through to the end.
Select Maintenance and then Clean the
milk pipework.
The process will start.
Follow the instructions in the display.
Insert milk pipe in cleaning agent will
appear in the display.
Preparing the cleaning solution:
Dissolve the powder in a container
with 200 ml of lukewarm water. Stir
the solution with a spoon until it has
fully dissolved.
Carrying out the cleaning process:
Place the container next to the
machine and hang the end of the milk
tube in the solution. Make sure it is
placed sufficiently far into the
cleaning solution.
Touch OK.
Follow the further instructions given
in the display.
The cleaning process is finished when
rinsing has finished.
To Next Page
Loading...
