Cleaning and care
62
Central spout with integrated
cappuccinatore
With the exception of the stainless steel
cover, all parts of the central spout
should be cleaned in the dishwasher at
least once a week. This will remove
coffee and milk deposits effectively.
Clean the stainless steel spout cover by
hand only using hot water and a little
washing-up liquid.
Start in the Drinks menu.
If the central spout is in the uppermost
position it cannot be dismantled. The
central spout must be moved into the
maintenance position to do this.
Touch for 3 seconds.
The central spout will move into the
maintenance position.
Pull the stainless steel cover forwards
and off.
Pull the dispensing unit off towards
you.
Twist upper section with the holder
for the milk pipework and pull it off.
Then pull the Y-shaped piece off.
Release the spout nozzles .
To Next Page
Loading...
