Miele CM7500 - Fitting Descaling Cartridge

Using for the first time
24
– Automatic descaling:
The coffee machine will be descaled
automatically. For this method the
Miele descaling cartridge has to be
fitted. The Descale the machine
maintenance programme does not
have to be carried out.
– Manual descaling:
You have to carry out the Descale the
machine maintenance programme
yourself. You will be prompted when
to run the descaling programme. The
frequency will depend on the water
hardness range set for your machine.
 Select the required option and
touchOK.
If you have selected Automatic descaling
and not yet fitted a Miele descaling
cartridge, you will be prompted to do
so.
Fit the descaling cartridge
Observe the instructions given in
"Automatic descaling – the Miele
descaling cartridge".
 Remove the cover from the back of
the coffee machine. Pull the cartridge
holder forwards and insert the
descaling cartridge.
 Push the holder back into position
and replace the cover.
The descaling cartridge will fill with
water the next time the machine is
switched off.
A message will then appear regarding
the current start time set for automatic
descaling.
 TouchOK.
The coffee machine is now successfully
set up for use.
 Fill the water container with fresh,
cold tap water.
After setting the machine up you can
make your first drinks. Coffee beans
can be ground up to five times, as the
coffee machine checks whether there
is sufficient ground coffee to make an
aromatic cup of coffee, and will grind
more beans as necessary.