Miele CM7500 - Making Drinks During Automatic Descaling (Activation Phase)

Automatic descaling
80
Making drinks during
automatic descaling (activation
phase)
You can cancel automatic descaling
during the activation phase and
postpone the start time if necessary.
Automatic descaling can be cancelled
on two consecutive days to make
drinks. After the third cancellation
either automatic scaling must be
carried out as soon as the appliance is
switched on, or you need to change to
manual descaling.
 Touch the On/Off sensor.
The time left in hours is shown in the
display.
Cancelling automatic descaling.
 Touch Cancel.
The descaling solution is rinsed out of
the pipework. You can now make
drinks.
Delay start time
 Touch Start time.
Cancel the automatic descaling process and
change the start time? will appear in the
display.
 TouchYes.
 Set the new start time and touchOK.
The new start time is saved. The
descaling solution will be rinsed out of
the pipework. From now on automatic
descaling will start at the new time.