Automatic descaling
78
To fit a descaling cartridge:
Insert the cartridge and push it
upwards as far as it will go.
Push the cartridge holder back
and then close the cover.
Follow the instructions in the display.
The next time the coffee machine is
switched off, the descaling cartridge
will fill with water when the rinsing
process takes place. You will hear the
cartridge being rinsed with water at
frequent intervals.
Switching automatic descaling
on and off
The descaling method is selected when
you set the machine up for first use.
It is, however, possible to switch the
Automatic descaling method on or off in
the Settings menu.
Start in the Drinks menu.
Touch.
Select Settings and then Descaling.
Select Descaling method.
You can now select the descaling
method:
– Automatic descaling
– Manual descaling
Select your chosen descaling method
and then touchOK.
Please note that if you change the
descaling method to automatic
descaling you will need to run the
manual descaling programme once to
remove any limescale deposits from
the pipework.
To Next Page
Loading...
