Miele CM7500 - Page 65

Cleaning and care
65
 Clean the surfaces of the central
spout with a damp cloth.
If necessary clean the milk pipework
under running water with the brush
supplied:
 Insert the brush in the tube and move
it back and forth as far as it will go
until all milk residue has been
removed.
Replace the components of the central
spout:
 Reassemble the dispensing unit.
Push the spout nozzles firmly back
onto the dispensing unit.
Make sure that all parts are tightly
connected to one another.
 Push the dispensing unit back into
the central spout and replace the
stainless steel cover.
 TouchOK.
Tip: If the coffee machine is switched
off, the central spout components can
be removed and cleaned at any time.