Operation
25
Fire hazard!
Do not leave the cooktop unattended
whilst it is being used.
Switching on
Push in the control knob and turn it
anti-clockwise to the ignition
symbol. The ignitor will "click" and
ignite the gas.
When a flame is visible, keep the
control knob pressed in for
5-10seconds, and then let it go.
If the burner does not ignite or goes
out, turn the control knob back to "".
Aerate the room or wait at least one
minute before trying again. Try
keeping the control knob pressed in
for a little longer the next time.
If the burner does not ignite the
second time, turn the control knob
back to "" and see "Problem solving
guide".
Switching on during a power outage
If there is an interruption to the
electricity supply, the gas can be
ignited manually, e.g. with a match.
Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
Hold the control pressed in and light
the gas at the burner with a match.
Keep the control pressed in for a
further 5-10seconds and then
release it.
To Next Page
Loading...
Need help?
General