Miele CS 1018 G

Gas connection
50
Depending on country of destination
this appliance is set up for connection
to natural gas or ULPG.
See adhesive label on the appliance:
G = NG (natural gas)
LP = ULPG (Propane/Butane)
Depending on country of destination
jets are supplied for conversion to a
different type of gas. If the appropriate
jets have not been supplied with the
appliance you will need to contact
Miele. Conversion to another type of
gas is described under the relevant
Section.
Connection to the appliance
The gas connection has a ¹/₂" conical
thread. There are two possibilties for
connection:
– fixed connection
– flexible hose class B or D which
complies with AS/NZS 1869 and
must be certified. The minimum
innerØ must be 10mm and the
maximum length 1.2m.