Miele CVA 5060 Operating Instructions

The coffee machine must be cleaned thoroughly (see
"Cleaning and care") before you fill it with water and coffee
beans.
It is vital that you programme the water hardness level
of your water (see "Settings: Water hardness").
Filling the water container
The quality of the water plays an important part in
the overall quality of the coffee. The water
container should therefore be emptied and filled
with fresh tap water every day.
Hot water and other liquids could damage the machine.
Only use cold, clean tap water and fill the machine every
day. On any account, do not use mineral water. Mineral
water will cause serious limescale residues to build up in
your machine and damage it.
^
Open the machine door.
^
Pull the water container forwards to remove it.
Filling the water and coffee bean containers
19

Miele CVA 5060 Specifications

General

Type	Coffee/Espresso
Product type	Espresso machine
Capacity in cups	15 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Built-in
Water tank capacity	2.3 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Cord length	3 m
Product color	Black, Stainless steel
Housing material	-
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	480 mm
Width	595 mm
Height	455.5 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	450 mm