Cleaning and care
68
Press the two retainers together (see
arrows).
The cup rim sensor is released.
The cup rim sensor can be cleaned in
the dishwasher, or by hand using
warm water and a little washing-up
liquid.
To refit the cup rim sensor, press it
into the holder on the central spout
from below.
Cleaning the milk flask with lid
The milk flask should be taken apart
and cleaned every day after use.
Both the lid and the glass flask can be
cleaned in the dishwasher, or by hand
using warm water and a little washing-
up liquid.
Remove and empty the milk flask.
Rinse the milk pipework in the lid
under running water and then place
the lid in the dishwasher.
If no water runs out of the connecting
piece, clean it with the cleaning
brush.
Clean the glass flask.
Dry all the parts and reassemble the
milk flask.
Clean the milk flask holder on the
coffee machine with a damp cloth.
To Next Page
Loading...
