Miele CVA 7840 - Rinsing the Milk Pipework; Maintenance Programme: Clean the Milk Pipework

Cleaning and care
74
Rinsing the milk pipework
If you have made a drink with milk, the
coffee machine will rinse the milk
pipework automatically after a few
minutes. You can also start the Rinse the
milk pipework function manually.
Maintenance programme:
Clean the milk pipework
You can run the maintenance
programme with the Miele cleaning
cartridge or with the cleaning agent for
milk pipework (small sticks of powdered
cleaning agent). The maintenance
programme lasts for
approx.20minutes.
If you have switched on automatic
cleaning and fitted a ready-to-use
cleaning cartridge, the Clean the milk
pipework maintenance programme will
run using the cleaning cartridge.
Cleaning the milk pipework with the
cleaning cartridge
In addition to using the automatic
cleaning function, you can also start the
maintenance programme manually, e.g.
to clean the milk pipework after a
period of intensive use.
The Maintenance menu is displayed.
 Touch Clean the milk pipework.
 Follow the instructions in the display.
Cleaning the milk pipework with the
cleaning agent for milk pipework
(sticks)
If automatic cleaning is switched off,
the milk pipework must be cleaned at
least once a week.
For optimal cleaning results, we
recommend Miele cleaning agent for
milk pipework.
The cleaning agent for milk pipework
has been specially developed for use
with Miele coffee machines and
prevents subsequent damage.
For each cleaning process, you will
need 2sticks of the cleaning agent for
milk pipework.
It is available to order via the Miele
webshop or directly from Miele (see the
end of this booklet for contact details).
Clean the milk pipework appears in the
display.
The cleaning process cannot be
cancelled. It must be completed
through to the end.
 Confirm the message withOK.
 Follow the instructions in the display.
When Fill water container with lukewarm
water and cleaning agent up to the 
symbol and replace it. Close the door
appears in the display, proceed as
follows.
Preparing the cleaning solution
 Open 2sticks of the cleaning agent
for milk pipework and empty the
contents into the water container.