Cleaning and care
64
Cleaning the interior, inside of
the machine door, and drip tray
Clean the interior and front of the
machine as part of the normal cleaning
process. For instance, if you remove the
water container, use this as an
opportunity to clean the area under the
water container at the same time.
The drip tray is located at the bottom on
the inside of the machine door.
Remove and empty the drip tray on a
regular basis. The drip tray is
dishwasher safe.
Open the machine door.
Remove and clean the drip tray.
Remove the following parts from the
interior:
- Water container
- Drip tray
- Maintenance container
- Brew unit
- Bean containers
Tip: Use your vacuum cleaner to
remove dry ground coffees.
Clean the interior and the inside of
the machine door by hand with a
clean and slightly damp cloth/
microfiber cloth. After cleaning, wipe
the interior and machine door dry
using a soft cloth.
Put all the parts back in place,
including the drip tray.
Close the machine door.
Cleaning the front of the
machine
If soiling is not removed promptly, it
could cause the surface to alter or
discolor.
Remove any soiling on the front of
the machine straight away.
Make sure that water cannot get
behind the display.
Clean the front of the machine after
descaling. If possible, wipe up any
spillages of descaling agent
immediately.
Tip: Before cleaning the control panel,
open the machine door. This will
prevent accidental operation.
Clean the front of the machine with a
clean and slightly damp cloth/
microfiber cloth. After cleaning, wipe
the surfaces dry using a soft cloth.
To Next Page
Loading...
Need help?
General
