Installation
*INSTALLATION*
90
The door opening limiters can be
removed, allowing you to increase the
opening angle to approx.170°. This
makes it easier to remove the bean
containers, for example.
Removing the door opening limiters
Make sure that sufficient space is
available for the larger door opening
angle and that the machine door is
not going to hit an adjacent wall.
Remove the door opening limiters
from the hinges, e.g., by prizing them
out with a screwdriver.
The machine door opening angle has
now been increased to approx.170°.
To Next Page
Loading...
Need help?
General
