Changing a light bulb
Disconnect the cooker hood from
the mains supply by
– withdrawing the fuse from the
fused spur connection unit (if
accessible), or
– withdrawing the mains fuse, or
– removing the screw-out fuse, (in
countries where this is applicable).
When in use the halogen bulbs
become very hot. Do not touch im-
mediately as it remains hot for some
time after being switched off.
Do not touch the bulb surface di-
rectly when changing the bulb as
this will damage it (fat particles ad-
here to the surface). Please follow
the manufacturer’s instructions.
To change the halogen bulb first
remove the outer ring
b
.
Then detach the circlip
c
taking
care that the glass
d
does not fall
out.
The halogen bulb
e
is fitted to a
push-in connection socket. To re-
place pull out the old bulb and fit a
new one.
Replace the glass
d
and press the
circlip
c
carefully into the holder.
Never use the lighting without the
lamp cover as it has a filter de-
signed to cut out hamful rays.
Now replace the outer ring b.
Cleaning and care
17
To Next Page
Loading...
