Miele DA 3366 User Manual

Operation
17
Switching the fan on
For light to heavy cooking vapours
s
elect from power levels 1 to 3. For
short periods of strong vapours and
cooking odours, e.g. whilst searing
meat, select the IS (Intensive) setting.
 P
ull the deflector plate out. For
optimum extraction with minimum
noise levels, always pull the deflector
plate out to its full extent.
 Switch the fan on with the fan switch
 and select the power level you
want.
Fan run-on after cooking
 It is advisable t
o run the fan for a few
minutes after cooking has finished to
neutralise any lingering vapours and
odours in the air.
Switching the fan off
 Push the deflector plate in to switch
the fan off. The next time the
deflector plate is pulled out the
rangehood will operate at the power
level it was at previously.
 Alt
ernatively you can slide the fan
switch to 0.
Switching the cooktop lighting
on/off
The cooktop lighting can be switched
on
and off with the deflector pushed in
or pulled out and independently of the
fan.
 Use the lighting switch  t
o switch
the cooktop lighting on (1) or off (0).

Miele DA 3366 Specifications

General

Bulb type	LED
Bulb power	3 W
Illuminance	320 lx
Number of bulbs	2 bulb(s)
Type	Wall-mounted
Cord length	1.5 m
Product color	Stainless steel
Built-in display	No
Exhaust connection diameter	150 mm
Intensive speed	Yes
Number of speeds	3
Type of extraction	Ducted/Recirculating
Noise level (low speed)	44 dB
Maximum extraction power	430 m³/h
Noise level (high speed)	51 dB
Lighting efficiency class	A
Noise level (medium speed)	47 dB
Maximum recirculating power	300 m³/h
Minimum distance from gas hob	650 mm
Fluid dynamic efficiency class	D
Grease filtering efficiency class	B
Minimum distance from electric hob	450 mm
Current	10 A
Connected load	120 W
AC input voltage	230 V
Annual energy consumption	61.4 kWh
Number of filters	1 pc(s)

Weight and Dimensions

Depth	275 mm
Width	595 mm
Height	34 mm
Weight	12000 g