Installation
28
Appliance dimensions
a
The front section of the wall housing unit must be fitted with a shelf to the
depth of t
he partition wall. If the appliance is fitted further back, e.g. to
accommodate a front panel, then the shelf depth should be correspondingly
deeper.
b
The partition wall in the wall unit must be removable.
c
For extraction mode: the height of the wall unit and the cut-out dimensions
must tak
e account of any accessories fitted, e.g. a silencer.
d
Recirculation mode with conversion kit DUU 151.
f
When installing the rangehood with a DAR 3000 drop-down frame, make sure
that you no
te the different wall unit height (please refer to the dimensions given
in the DAR 3000 building-in diagram).
To Next Page
Loading...
