Miele DA 7378 D - Altering or deactivating the charcoal filter operating hours counter; Deactivating power management

Changing settings
29
Altering or deactivating the
charcoal filter operating hours
counter
You can set the operating hours counter
to suit the type of cooking you do.
The factory default setting is a reactiva-
tion interval of 180hours.
 Switch off the fan and the lighting.
 Press the control and the operating
hours control at the same time.
The charcoal filter symbol and one of
the fan power levels will flash.
Fan power level indicators 1 to B show
the time set:
Indicator 1 ............................. 120hours
Indicator 2 ............................. 180hours
Indicator 3 ............................. 240hours
Indicator B.......................... deactivated
 Select the duration you want with
the or control.
 Confirm your choice with the operat-
ing hours control.
All the indicator lights will go out.
If you do not confirm your selection
within 4minutes, the cooker hood will
automatically revert to the original set-
ting.
Deactivating power manage-
ment
Keep in mind that deactivating this
function may increase energy con-
sumption.
Activating/deactivating Power Man-
agement
 Switch off the fan and the lighting.
 Press the fan run-on control for
approx. 10seconds until the indicator
for fan power level 1 lights up.
 Then press in turn:
– the lighting control,
– the  button, and then
– the lighting control.
If Power Management is activated, the
1 and B indicators light up constantly.
When it is deactivated, the 1 and B in-
dicators flash.
 Press the control to deactivate
Power Management.
The 1 and B indicators will flash.
 Press the control to activate Power
Management.
The 1 and B indicators will light up con-
stantly.
 Confirm the setting with the run-on
option control.
All the indicator lights will go out.
If you do not confirm your choice of set-
ting within 4minutes, the cooker hood
will revert to the old setting.